Datalogic DS4800 Instrukcja Użytkownika Pobierz pdf (Strona 8)

2KN FAMILY AND DS4800

2 PROGRAMMING COMMANDS

2.1 CONNECTION TO DEVICE

DESCRIPTION HOST COMMAND REPLY MESSAGE

Enter Host Mode <ESC> [ C <ESC> H <CR><LF>

After entering this command, the device responds with the first reply message and

then waits for the following command.

From now on device is in CONNECTED state. Normal data flow is inhibited until it

comes back to the IDLE state.

Enter Terminal Mode <ESC> ] B <ESC> R <CR><LF>

After entering this command, the device responds with the second reply message

and then waits for the following command in Terminal mode.

Enter Programming Mode <ESC> c M <B0

> ADDR <ESC> c <CR><LF>

ADDR is a character indicating address of the device in an ID-NET™ Master/Slave

reading system layout

ADDR = <30

> + <Device Address> where:

• Device Address = 0: Standalone device or Master ID-NET™ device

• Device Address = 1 to 31: Slave ID-NET™ device

This means:

• ADDR = <30

>: Standalone device or Master ID-NET™ device

• ADDR = <31

> to <4F

>: Slave ID-NET™ device

After entering this command, the device responds with the third reply message and

then waits for one or more programming strings as shown in Chapter 3 and 4.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 99 100

Brak uwag

Datalogic DS4800 Instrukcja Użytkownika Strona 8